RideEFFEX Lift & Lowering Block Kit with 2 Degree Pinion Shims | 3"

Part # 13-3LIFTA

​

• Fits: 1-3/4" up to 2-1/2" widths

• For use only on a minimum of 2" and water leaf springs

• For rear axle application use only

• Univeersal design and willl fit most vehicle leaf springs

• Use on cars, mid-size and full-size trucks

• 2" pinion shims included to reduce chance of drive line vibration

• Replace U-Bolts when adding lift or lowering block kits

• Easy to install, no special tools needed

• Not for 3" wide leaf springs: See F-150 single 13-2140 and Dual 13-2060 center pin leaf spring block kits

• Installation Instruction Included: Please Read Safety Warnings and All Instructions Prior to Installing Blocks with Pinion Shims

• Pinion Shim Angle Use:
  When Lifting – Thick part of Shim is Placed Forward, Thin Part is Rear Facing
  When Lowering – Thin Part Shim is Placed Forward, Thick Part is Rear Facing